A tank inspection camera helps check the inside of tanks, pipes, and other hard-to-reach places. This camera allows customers to find issues such as leaks, cracks, or blockages without entering, making inspections safer and more effective. Still, consistent maintenance is crucial to keeping the camera running as it should.
Good maintenance guarantees the camera runs longer and helps prevent damage. It also enables accurate findings and crisp photographs. Without maintenance, the camera can stop working or provide poor-quality video.
The following advice will help prevent unplanned breakdowns and cut repair costs.
1. Clean the Camera After Every Use
Following an inspection, garbage, soil, and dust can be collected on the camera. Inappropriate cleaning could impair the camera’s image quality and, over time, cause it to fail. Clean the camera after every use to keep it in good shape.
Softly clean the camera with a soft towel from filth. If tenacious dirt stays, wash it with a wet cloth and light soap. Avoid strong chemicals since they could damage the lens. Small parts can have dust cleaned with compressed air or a soft brush.
Always look for grease or trash on the wires and lens. A dirty lens can blur photos; dust on connections might lead to connection issues. However, keeping a clean camera ensures it runs for a long period and catches clear photographs.
2. Store the Camera Properly
The tank inspection camera is kept safe by proper storage. Damage can result from leaving it out in excessive temperature, moisture, or dust. A suitable storage schedule helps increase the lifetime of the camera.
Keep the camera dry and clean. If it comes with a protective cover, use it to guard against damage. Check that the enclosure is strong and features padding to shield the camera from impacts. Electronic components may suffer if you leave the camera in direct sunlight or close to heat sources.
Before storing the camera, check that it is dry and dust-free. Moisture can cause rust or electrical issues. Store cables in an orderly to avoid tangles and breakage. With proper storage, the camera will keep its excellent form and be ready for subsequent use.
3. Inspect the Cables and Connections
A tank inspection camera operates properly because of its electrical wires and connections. However, the camera becomes unable to connect or operate whenever cable damage occurs. Regular inspections help avoid unexpected breakdowns.
Before and after the inspection, check all wires for signs of damage. If a cable seems worn out, replace it to prevent further problems. A cable fracture can interfere with video transmission and the power supply, leading to diminished operational quality.
The cables need gentle handling, so avoid twisting and excessive dragging. Such handling will damage and weaken the internal wires. Cable organizers and ties should be used to maintain the wires’ organized state.
4. Keep the Battery Charged
A tank inspection camera usually runs on a battery. If the battery is improperly charged, the camera could turn off in the middle of an inspection. Maintaining proper battery conditions guarantees seamless performance.
Fully charge the battery before every use. Avoid overcharging, though, as it shortens battery life. Charge the battery at least once a month to prevent it from running empty if the camera is not used for a long time.
Look for any indicators of damage to the battery, such as leaks or swelling. To prevent danger, a defective battery should be replaced immediately. Also, make sure you use the camera’s accompanying proper charger. The wrong charger could lead to battery failure or overheating.
5. Protect the Camera from Water and Moisture
Though most tank inspection cameras are constructed for harsh environments, too much moisture can still cause problems. Water damage could harm the lens, internal components, and connections, therefore leading to failures.
Before running the camera, always be sure it is water-resistant. If it is not, exercise extra caution or avoid using it in damp surroundings. Use protective covers as needed. Once you have used the camera for inspection in a wet environment, dry it before keeping it.
If moisture enters the camera, never switch it on. Let it dry totally or absorb the moisture using silica gel packs. If the problem is significant, bring the camera to an expert for repairs.
6. Update the Software Regularly
Many tank inspection cameras come with software for analyzing and storing footage. Updating the software ensures better performance and compatibility with other devices.
Ask the manufacturer for routinely scheduled software upgrades. Updates could include new features, bug repairs, or better picture quality. Software updates also help avoid security problems and errors.
Back up any critical files on the camera before updating. Certain updates can wipe saved data or reset settings. If you’re unsure how to update, see customer support or the user manual.
7. Get Professional Servicing When Needed
Routine maintenance does not eliminate the need for future professional attention. Specialists will examine and resolve concealed system damages.
The camera must be inspected quickly at the first indication of equipment failure, such as blurry images, broken connections, or irregular sounds. Waiting to fix equipment leads to damage that cannot be repaired. An expert technician can perform maintenance procedures that optimize camera performance by calibrating and cleaning.
Service follow-ups must be performed according to manufacturer recommendations. Some cameras are inspected yearly, but for others, additional servicing is only performed when technical problems occur. Professional servicing provides precise evaluations, ultimately extending your camera’s operational lifespan.
Conclusion
A tank inspection camera is great for examining pipes and tanks without direct access. However, regular maintenance is required to keep it running properly. These seven maintenance ideas will help you ensure your camera remains in good shape. Besides saving money on repairs, proper maintenance guarantees precise and clear inspection findings and dependability whenever you need it.
Leave a Reply